Repair Service To Your Module - BMW X5 2005 EBCM

Repair Service To Your Module - BMW X5 2005 EBCM
Click To Enlarge
  • Item #: MRP-R-BMX5-05-ABS
  • Manufacturer: Bosch
  • Manufacturer's Product Number: 0 265 950 067
  • Condition: Refurbished
BMW X5 2005
ABS Pump Control Module

Compatible part numbers:
  0 265 950 067  
Please match product image to your ABS module.

You will send us your bad ABS control module (only the electronic part aka "brain box").  We will rebuild it, test on a special test stand and on the vehicle and return it to you.
Please do not send the whole unit - only the black box.

No additional programming required.

Please note, not all controls are repairable.

Known problems:

  • ABS light is always on or intermittent
  • ABS, Brake and Traction lights are on
  • No communication with ABS module
  • ABS pump constantly running
  • Trouble codes for ABS pump, communication codes or speed sensor codes.
For years we perfected a rebuild solution and after over a thousands of these controls rebuilt we have less than 1% warranty returns.
That's what makes as different from the others rebuilders.

We are not only replacing failed parts - we rebuild and update the complete unit, replace all the parts that are known to be weak and might also fail with updated parts that can withhold the pressure and modify circuit board in a way to prevent future failure.
That's why we stay behind every unit we rebuild. Your control will come ready to plug.

Module does not required any coding (programming) after installation.

Warranty info: This repair service comes with a Lifetime Warranty. Please read full warranty Terms and Conditions.

Disclaimer: The ABS light can illuminate for any malfunction in the ABS or traction control system, including failure of ABS module, speed sensors, wiring harness and plugs, etc. We cannot diagnose what is exactly the problem with your vehicle, especially on the distance. This is your responsibility to pinpoint it to ABS module.

  We recommend to take it to the shop, where mechanic can read ABS trouble codes with appropriate scanner (able to read ABS codes on European vehicles). In some cases there are multiple problems for different components.

  Please, do not send us any salvage yard units - most of them have water damage and non-repairable. Also, if numbers on the original and replacement units are not the same - this unit will not work on your vehicle.

  If you or someone tried to repair ABS module - we can evaluate and possibly repair it, but only in case that no additional damage was created.

  If your ABS module is beyond the repair point or no failure found inside ABS unit - we will return it to you per your request and refund your payment minus return shipping cost.

Removal/installation instructions: Installation instructions for DIY are available, though it is recommended to do replacements in a professional mechanic shop. You can still drive the vehicle with the ABS control module removed, though we cannot take any responsibility for failures that may occur while the module is removed (again, the removed module should not effect driving performance). We recommend taping plastic around the hydraulic part and the electrical plug that remains on the vehicle to prevent dirt and debris from getting inside the unit.

Repair request: To help us expedite your order, please fill out our Repair Request Form before you complete the purachase.


  * Marked fields are required.
Price $149.00
Reviews (0) Write a Review
No Reviews. Write a Review